July 30, 2010 by Daniel_Melo
A file with the homework assigned to be submitted Monday, Aug 2nd, is available in the folder "Homework".
- Daniel_Melo's blog
- Login to post comments
.
Internet Explorer 7 + preferred.
This website is not liable for messages and contents posted by the users. The users are liable for their respective postings.
The website is created using Drupal, an open-source CMS.
Internet Explorer 7 + preferred.This website is not liable for messages and contents posted by the users. The users are liable for their respective postings.
The website is created using Drupal, an open-source CMS.
HW2-5
How do I reproduce the original stacking sequence [(38/50/12) of HW#5 in MicMac-flex?
Can obtain same Eoi but not same Efi.
Change ply-angle order in theta/1/2/3/4 helps but cannot manage to have correspondence of all Ei at the same time.
Core material and ply thickness are not mentioned in the text, thus I assume have default value. Plus, trying to change them made things worst.
With which MicMac were the original engineering constant reproduced in the HW#5 viewgraph obtained ?
Cheers,
D
Diego Cocco
mobile +39 328 4310108
e-mail diego.cocco@live.it
skype diego_c_73
same problem
Hi,
I have the same problem as Diego with Efi, hw#5 and hw#6. When I tried with GenLam I got very closed results with the ones in the homework, but here I got 33 plies.
Please help.
elena
Re: HW2-5
Hi Diego,
You should try Genlam, not MicMac 4.3, since the ply position will affect the flex properties.
Good Luck!
Daniel
It was easier to match with
It was easier to match with MicMac, as this was more familiar. It is still posible to match with GenLam?
elena
Hi Elen, As far as I
Hi Elen,
As far as I understand, it is not possible. At this point, I am using Genlam to verify my finding with MicMacFlex.
Diego
Diego Cocco
mobile +39 328 4310108
e-mail diego.cocco@live.it
skype diego_c_73